That Wanaka Tree Autumn Sunrise

Wanaka, New Zealand

That Wanaka Tree Autumn Sunrise

April 15, 2026  – This is one of two locations we revisited this year that we also went to on our 2019 trip to New Zealand. We stayed in Wanaka 4 nights and the first morning we made it a point to get up early and be at That Wanaka Tree for sunrise. Would have liked to include more of the beach on the left side but the beach was occupied by about 200 of my “new best friends”. A fresh blanket of snow covers Mount Aspiring / Tititea, New Zealand’s 23rd-highest mountain. The peak’s altitude of 9,951 ft. (3,033 meters) makes it the country’s highest outside the Aoraki / Mount Cook National Park region.

This image is derived from 450 focus bracketed images yielding 30 focus stacked images in a 3 row by 10 column array. Shot using Canon R5 Mk2, Canon R100-400mm zoom at 300mm lens, f/11, 1/20 sec. exposure time and ISO 100.

The original full sized image as shown is:

  • 665 Megapixels
  • 18,127 x 36,730 pixels
  • 6″ x 122″ (5 ft.  x 10 ft. 2 in. ) 300 PPI original image size
  • Available in 1:2 ratio 12″ x 24″ up to 48″ x 96″ Slight crop on Standard Plaque, AlumiPress or PlexiPlaq
  • Tri-Panels up to 60″ x 120″ on Standard Plaque, AlumiPress or PlexiPlaq
  • Wall murals up to 5 ft.  x 10 ft. 2 in. at 300 PPI
  • Wall murals up to 10 ft. x 20 ft. 4 in. at 150 PPI


Click here for information about purchasing a license this for this image.

Contact us for a quote on your specific size and mounting options needs.

  • Standard Plaque prints are available in four Finish Choices. Finishes are acid-free and ultra violet (UV) light protected, shielding it against fading and deterioration and can be wiped down with water or any ammonia-free cleaners.
  • We highly recommend the Metalized Paper for prints, plaques and PlexiPlaq products. This special paper does an excellent job of bringing out the detail of the photos.
  • All of our plaques are produced by Duraplaq on photo quality High Density boards. Numerous Mounting Styles are available along with many Edge Treatments.
  • Approximate lead time for shipping of Prints is 1 week. Plaque mounts and other options 2 weeks.

Mounting Options

The above sizes and mounting options are a small subset of the overall mounting options we have. We offer all of our photos on a variety of mounting options from just prints, framed, plaque mounting, Aluminum Prints, or Plexiplaq. We also offer Tri-Panel, Quad-Panel or Wall Clusters & Splits. Most of our Gigaramas are available as wall murals. We also license our photos for various commercial applications.

Contact us for a quote on any of these options.