Snake River Overlook

Teton National Park, Wyoming

( Click on image to access high resolution virtual tour. Not for mobile devices.)

July 30, 2026 — This photograph is my tribute to Ansel Adams’s iconic 1942 photograph, The Tetons and the Snake River. I photographed the scene from Snake River Overlook in Grand Teton National Park, the same general vantage point from which Adams created his celebrated image more than eight decades ago. The landscape has changed considerably since Adams stood here—most noticeably as trees have grown and increasingly obscure portions of the Snake River—but the great sweep of the valley toward the Teton Range remains unmistakable.

My photograph was created using modern ultra-high-resolution techniques that Adams could scarcely have imagined. The finished panorama was assembled from 1,205 focus-bracketed photographs, combining focus stacking with panoramic stitching to produce a 1.51-gigapixel image with extraordinary detail throughout the landscape. At its native 300 PPI resolution, the photograph measures approximately 93 × 211 inches—more than 7½ feet high and 17½ feet wide—allowing this classic Grand Teton landscape to be reproduced at architectural scale without artificial enlargement

The original full-sized image as shown is:

1.51 Gigapixels
27,897 x 63,509 pixels
93″ x 211″ 300 PPI original image size
Available in a 1:2.236 ratio 15″ x 33.5″ up to 42.9″ x 96″ with slight cropping on Standard Plaque, AlumiPress or PlexiPlaq
This image can be cropped to your desired dimensions.
Wall murals up to 93″ x 211″ ( 7 ft. 9 in. x 17 ft. 7 in.) at 300 PPI
Wall murals up to 186″ x 422″( 15 ft. 6 in. x 35 ft. 2 in. ) at 150 PPI/span>

Click here for information about purchasing a license this for this image.

Standard Plaque prints are available in four Finish Choices. Finishes are acid-free and ultra violet (UV) light protected, shielding it against fading and deterioration and can be wiped down with water or any ammonia-free cleaners.
We highly recommend the Metalized Paper for prints, plaques and PlexiPlaq products. This special paper does an excellent job of bringing out the detail of the photos.
All of our plaques are produced by Duraplaq on photo quality High Density boards. Numerous Mounting Styles are available along with many Edge Treatments.
Approximate lead time for shipping of Prints is 1 week. Plaque mounts and other options 2 weeks.
Mounting Options

The above sizes and mounting options are a small subset of the overall mounting options we have. We offer all of our photos on a variety of mounting options from just prints, framed, plaque mounting, Aluminum Prints, or Plexiplaq. We also offer Tri-Panel, Quad-Panel or Wall Clusters & Splits. Most of our Gigaramas are available as wall murals. We also license our photos for various commercial applications.