Lower Falls at Crystal Cascade

Pinkhams Grant, NH


Lower Crystal Cascade Falls( Click on image to access high resolution virtual tour. Not for mobile devices.)

Sept. 30, 2021 — We were on our way up the Tuckerman Ravine Trail to Crystal Cascade. This little waterfall was about 80 yards before the overlook for Crystal Cascade. I felt it was such a serene scene that I had to stop and photograph a panorama of the area.

I photographed this scene at a 200mm focal length. The short distances to the nearby objects required me to photograph the entire scene using focus bracketing. I captured 1,698 individual focus-bracketed images, which yielded 154 focus-stacked images—11 rows × 14 columns—used to stitch together the final panorama. My settings were f/11, 1/50 second, and ISO 800.

The original image is:

  • 2.15 gigapixels
  • 38,106 x 56,566 pixels
  • 127″ × 188″ (10 ft. 7 in. × 15 ft. 8 in.) at 300 PPI — original uncropped image size
  • Image shown is uncropped, with an approximately 1:1.48 aspect ratio.
  • Available in a 2:3 ratio (with slight cropping) from 10″ × 15″ to 48″ × 72″ as a Print, Standard Plaque, AlumiPress, or PlexiPlaq.
  • As a Tri-Panel, it is available up to 96″ × 144″ (three 48″ × 96″ panels) with no cropping.
  • Wall murals as large as 10 ft. 7 in. × 15 ft. 8 in. at 300 PPI. Contact us for a price quote.
  • Wall murals as large as approximately 21 ft. 2 in. × 31 ft. 5 in. at 150 PPI. Contact us for a price quote

 

Click here for information about purchasing a license for this image.

Print Sizes and Mounting Options

Contact us for a quote on your specific size and mounting needs.

  • Standard Plaque prints are available in four finish choices. Finishes are acid-free and ultraviolet (UV) light protected, shielding them against fading and deterioration, and can be wiped down with water or ammonia-free cleaners.
  • We highly recommend Metalized Paper for prints, plaques and PlexiPlaq products. This special paper does an excellent job of bringing out the detail in the photographs.
  • All of our plaques are produced by Duraplaq on photo-quality high-density boards. Numerous mounting styles and edge treatments are available.
  • Approximate lead time for shipping prints is two to three weeks. Plaque mounts and other options are approximately three to four weeks.

The above sizes and mounting options are a small subset of the overall mounting options we offer. Our photographs are available as traditional prints, framed prints, plaque mounts, aluminum prints and PlexiPlaq. We also offer Tri-Panel, Quad-Panel, Wall Clusters & Splits, and many of our gigapixel photographs are available as wall murals. Commercial licensing is also available for a variety of applications.