Avenue of Flags
Mt. Rushmore, South Dakota
( Click on image to access high resolution virtual tour. Not on a mobile device! )
June 23, 2021, 6:30am. The Avenue of Flags commemorates all 50 states and the US Territories. I had seen several shots from this location with the flags and had always thought it would make a great Gigapixel image if one could be there at a time with few people and no wind. This particular morning I was waiting at the gate at 5am when they opened the gate. I first shoot a sunrise panorama at the far end of the avenue. As I was packing up to leave I noticed that there was almost no breeze and very few people. I quickly sat my camera rig up at a location I could capture the entire avenue. I had to take several pauses during the shooting to wait for people to get out of my frame or an occasional breeze that would set the flags to waving. A total of 767 images went into creating 90 focus stacked images that were then stitched to create the final 2,607 megapixel panorama.
Shoot with Canon R5, f/14, 1/10th sec., ISO 125 using Canon 300mm lens.
The un-cropped image is:
- 2.6 Giga-pixels
- 32,671 x 79,804 pixels
- 109″ x 266″ 300 dpi un-cropped (1:2.5. ratio) image size
- Available in 9:16 ratio from 10″ x 25″ to 38″ x 96 ” as Print, Standard Plaque, AlumiPress or PlexiPlaq.
- Prints, Plaques,AlumiPress or PlexiPlaqs can be custom cropped and sized to your custom wall size needs.
- Wall Murals available ratio in sizes up to 9 ft. x 22 ft. at 300 ppi (18 ft. x 44 ft at 150 ppi) without loss of detail.
- Wall Murals can be custom cropped and sized to your custom wall size needs.
Click here for information about purchasing a license this for this image.
Wall Mural Prices Wall Mural Materials
Contact us for a quote on your specific size and mounting options needs.
- Standard Plaque prints are available in four Finish Choices. Finishes are acid-free and ultra violet (UV) light protected, shielding it against fading and deterioration and can be wiped down with water or any ammonia-free cleaners.
- We highly recommend the Metalized Paper for prints, plaques and PlexiPlaq products. This special paper does an excellent job of bringing out the detail of the photos.
- All of our plaques are produced by Duraplaq on photo quality High Density boards. Numerous Mounting Styles are available along with many Edge Treatments.
- Approximate lead time for shipping of Prints is 1 week. Plaque mounts and other options 2 weeks.
Mounting Options
The above sizes and mounting options are a small subset of the overall mounting options we have. We offer all of our photos on a variety of mounting options from just prints, framed, plaque mounting, Aluminum Prints, or Plexiplaq. We also offer Tri-Panel, Quad-Panel or Wall Clusters & Splits. Most of our Gigaramas are available as wall murals. We also license our photos for various commercial applications.
Contact us for a quote on any of these options.

