Morning Light at Fairyland Point
Bryce Canyon National Park
( Click on image to access high resolution virtual tour. Not for mobile devices.)
Oct. 28, 2024 We had arrived at Bryce Canyon the previous afternoon. I had gone out that evening and scouted out a couple of locations and discovered Fairyland Point, a location that on our previous visit to Bryce Canyon I had not found. Photo Pills told me that the sun would be coming up almost directly down the valley to the east of the main overlook. The weather forecast called for overcast skies so I didn’t set an alarm. Luckily, I woke up about 6:30am and got up to check the weather conditions. It was nearly clear skies so I quickly got dressed and headed out to the point.
I shot this at 300mm focal length. The short distances to the nearest objects from the overlook required me to shoot all but the top two rows of the images using focus bracketing There are 6689 individual focus bracketed images yielding 495 focus stacked images, 11 rows x 45 columns, used to create this shot. My settings were f/11, 1/800th sec. ISO 400
The original image is:
- 10.87 Giga-pixels
- 65,162 x 166,967 pixels
- 217″ x 556″ (18 ft. x 46 ft., 4 in.) 300 PPI un- cropped image size
- Image shown is 1:2.56 ratio un-cropped.
- Available in 1:2.5 ratio (slight cropping) from 10″ x 25″ to 38.4″ x 96″ as Print, Standard Plaque, AlumiPress or PlexiPlaq.
- As a Tri-Panel it is available up to 48″ x 120″, no cropping
- As a Quad-Panel it is available up to 76.8″ x 192″, no cropping
- Wall Murals as large as 18 ft. x 46 ft. at 300PPI. Call for price quote.
Consult Price List for 1:2.5 ratio (slight cropping required) size options and cost details.
Contact us for a quote on your specific size and mounting options needs.
- Standard Plaque prints are available in four Finish Choices. Finishes are acid-free and ultra violet (UV) light protected, shielding it against fading and deterioration and can be wiped down with water or any ammonia-free cleaners.
- We highly recommend the Metalized Paper for prints, plaques and PlexiPlaq products. This special paper does an excellent job of bringing out the detail of the photos.
- All of our plaques are produced by Duraplaq on photo quality High Density boards. Numerous Mounting Styles are available along with many Edge Treatments.
- Approximate lead time for shipping of Prints is 1 week. Plaque mounts and other options 2 weeks.
Mounting Options
The above sizes and mounting options are a small subset of the overall mounting options we have. We offer all of our photos on a variety of mounting options from just prints, framed, plaque mounting, Aluminum Prints, or Plexiplaq. We also offer Tri-Panel, Quad-Panel or Wall Clusters & Splits. Most of our Gigaramas are available as wall murals. We also license our photos for various commercial applications.